Product ID:S-230 EPOXY ADHESIVE, PART A
MSDS Date:01/02/1996
FSC:8040
NIIN:00N091525
Status Code:A
Kit Part:Y
MSDS Number: CJLKJ

Emergency Phone: 800-255-3924

Info Phone: 717-396-2328; 717-396-2935

Cage: 03938

Telephone: 717-396-2328; 717-396-2935

Cage: 03938

EPOXY RESIN. (THIS PRODUCT FORMULATION DOES NOT CONTAIN

CAS: 25068-38-6

RTECS: CE6880000

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN AND EYES: PROLONGED SKIN AND EYE
CONTACT MAY CAUSE BURNS. REPEATED OR PROLONGED EXPOSURE MAY CAUSE
SENSITIZATION AND ALLERGIC REACTION. CAN CAUSE EYE IRRITATION,
REDNESS AND TEARING. INHALATION: MAY CAUSE IRRITATION OF
RESPIRATORY TRACT. TARGET ORGANS: UPPER RESPIRATORY TRACT AND SKIN.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:ANY MEDICAL CONDITION THAT MAY BE
AGGRAVATED BY A PULMONARY IRRITANT.

First Aid:SKIN: WASH WITH SOAP AND WATER OR WATERLESS SKIN CLEANSER
FOLLOWED BY SOAP AND WATER. GET MEDICAL HELP IF IRRITATION
PERSISTS. EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. GET
MEDICAL HELP IF IRRIT ATION PERSISTS. INHALATION: REMOVE VICTIM TO
FRESH AIR. GIVE ARTIFICIAL RESPIRATION IF NOT BREATHING. GET
MEDICAL ATTENTION. INGESTION: SEEK MEDICAL ATTENTION.

Flash Point Method:PMCC
Flash Point:=248.9C, 480.F
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS IN A FIRE MAY RUPTURE
DUE TO PRESSURE BUILD-UP; USE WATER TO COOL CONTAINERS TO PREVENT
THIS. NFPA 70 (RATING): HEALTH - 2; FIRE - 1; REACTIVITY - 2.

Spill Release Procedures:SCRAPE INTO CONTAINERS FOR DISPOSAL.

Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN. KEEP
CONTAINER TIGHTLY CLOSED. STORE IN A COOL, DRY PLACE. SAFE WORK
PRACTICES MUST BE EMPLOYED WHEN WORKING WITH ANY MATERIALS.
Other Precautions:WORK SITE ENVIRON: INITIALLY THERE MAY BE POTNTL
ADVERSE IMPACT ON INDOOR AIR QUALITY W/IN GEN WORK ARE DURING
INSTALLATION PROCESS. THEREFORE YOU SHOULD ADVISE BLDG
MANAGER/OTHER APPROP PERS THAT: (1 ) IT WILL BE NEC TO ESTABLISH &
MAINTAIN ADEQ VENT OF WORK AREA, W/OUT CAUSING ENTRY CONTAMS TO
OTHE R PARTS (SUPP DATA)

Respiratory Protection:NOT USUALLY REQUIRED. NIOSH APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:GOOD GENERAL/LOCAL VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:WASH WITH SOAP AND WATER BEFORE EATING,
DRINKING, SMOKING OR USING TOILET FACILITIES. LAUNDER CONTAMINATED
CLOTHING BEFORE REUSE.
Supplemental Safety and Health
OTHER PREC: OF BUILDING; AND (2) PERSONS WHO ARE SENSITIVE TO ODORS
AND/OR CHEMICALS SHOULD BE ADVISED TO AVOID THE WORK AREA DURING
THIS PROCESS. PHYSICAL DATA: % VOLAT BY WEIGHT (30 MIN @ 275F): 3.
CNDTNS (POLYM): WHERE THE FLOOR IS TO BE INSTALLED.

Boiling Pt:B.P. Text:NONE KNOWN
Vapor Pres:NONE KNOWN
Vapor Density:NOT KNOWN
Spec Gravity:1.45 (H*2O=1)
Evaporation Rate & Reference:NOT KNOWN
Solubility in Water:NONE
Appearance and Odor:GRAYISH-BROWN MASTIC WITH MILD EPOXY RESIN ODOR.
Percent Volatiles by Volume:3 (WT)

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
ALDEHYDES AND ACIDS FROM INCOMPLETE COMBUSTION.
Conditions to Avoid Polymerization:MIXING OF COMPONENT PARTS A & B
GENERATES HEAT. TO MIN THIS EFT, MIX THORO IN CNTNR THEN IMMED DUMP
ONTO SUBSTRATE(SUPP DATA)

Waste Disposal Methods:DO NOT REUSE CONTAINER. DISPOSE OF CONTAINER AND
ANY UNUSED CONTENTS I/A/W FEDERAL, STATE AND LOCAL WASTE DISPOSAL
REGULATIONS. CAN BE INCINERATED IN APPROVED FACILITY IF NOT IN
CLOSED CONTAINERS. IF MIXED WITH PART B, DISPOSE OF AS AN
ALKALINE, COMBUSTIBLE MATERIAL. DO NOT FLUSH UNUSED CONTENTS OR
RESIDUE DOWN DRAINS.

Toxicological Information:EPIDEMIOLOGY, TERATOGENICITY, REPRODUCTIVE
EFFECTS, NEUROTOXICITY, MUTAGENICITY, AND OTHER STUDIES: NO DATA
AVAILABLE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ecological:ECOTOXICITY, ENVIRONMENTAL FATE, PHYSICAL/CHEMICAL AND
OTHER: NOT AVAILABLE.

Transport Information:DEPARTMENT OF TRANSPORATION INFORMATION: SHIPPING
NAME: NOT CLASSFIED. HAZARD CLASS: N/A. ID#: N/A. EMERGENCY ONLY
CONTACT: CHEM-TEL 800-255-3924.

SARA Title III Information:SECTION 302 (RQ): NONE OF CHEMICALS IN THIS
MATL HAVE AN RQ. SECTION 302 (TPQ): NONE OF CHEMICALS IN THIS
PRODUCT HAVE A TPQ. SARA CODES: CAS # 7727-54-0: ACUTE, REACTIVE.
SECTION 313: NO CHEMICAL ARE REPORTABLE UNDER SECTION 313.
Federal Regulatory Information:US FEDERAL TSCA: CAS# 7727-54-0 IS
LISTED ON TSCA INVENTORY. HLTH & SFTY RPTG LIST: NONE OF CHEMS ARE
ON HLTH & SFTY RPTG LIST. CHEMICAL TEST RULES: NONE OF CHMES IN
PROD ARE UNDER CHEM TEST RULE. SEC TION 12B: NONE OF CHEMS ARE
LISTED UNDER TSCA SECTION 12B. TSCA SIGNIFICANT NEW USE RULE: NONE
OF CHEMS IN MATL HAVE SNUR UNDER TSCA. CLEAN AIR ACT: THIS MATAL
DOES NOT CNTN ANY HAZ AIR POLLUTANTS, CL ASS 1 OZONE DEPLETORS, &
CLASS 2 OZONE DEPLETORS. CLEAN WATER ACT: NONE OF CHEMS IN PROD ARE
LISTED AS HAZ SUBSTANCES , PRIORITY POLLUTANTS, TOXIC POLLUTANTS
UNDER CWA. (SUPDAT)
State Regulatory Information: